At first glance, such a simple operation as a replacement for the wheel, in fact, require the driver to a certain dexterity and skill. This is eloquently proved by numerous "injuries" in the form of detached car jacks Jacking, crumpled thresholds that applied to their cars inexperienced owners. The procedure for replacing the wheel has to be such. Turn on first gear, properly apply the parking brake and the opposite side of the car under the wheels Put a wedge-stops. Wedges should be lightly hammered hand in these, otherwise they will not reliably prevent the vehicle from moving. Now remove the spare tire, put him to the ground (to the car it better Do not lean) and loosen the nut a damaged wheel. Next, lift the car with the jack, loosen the mounting nuts, remove the faulty wheel and put it on the ground. Then put a spare tire, greed, and tighten the key (as possible), nuts or bolts, lower the car to the ground and finally tighten the nuts (or bolts). Remove the wheel to remove a spare seat and pull from under the wheels of the wedges.